Fenrir is a promising new user mode screen reader. It is primarily written in python 3. Here are my instructions to install it on a raspberry pi.
I am assuming that you are using RASPBIAN JESSIE LITE and are at a terminal prompt.
Updating your installation
You must update your installation of raspbian otherwise components like espeak will not install correctly.
sudo apt-get update
Let the update finish. The above command just fetches the listing of packages that need to be updated. Now do the actual upgrade.
sudo apt-get upgrade -y
This is going to take a while to complete.
You now have to install several dependencies for fenrir to work.
This is the speech synthesizer fenrir will use.
sudo apt-get install libespeak-dev
sudo apt-get install python3-pip -y
Fenrir is written in python 3.
The python daemon package
sudo apt-get install python-daemon -y
A package that allows fenrir to run as a service.
sudo pip3 install -evdev
A python package that handles keyboard input.
The speech-dispatcher package
sudo apt-get install speech-dispatcher -y
The above package is required to get fenrir to talk to a speech synthesizer such as espeak.
The ConfigParser package
sudo pip3 install configparser
You may need this dependency to parse the fenrir configuration file.
A module for checking spelling
sudo apt-get install enchant -y
sudo pip3 install pyenchant
An optional package to handle spell checking.
sudo apt-get install git -y
Git is a version control system which you will use to pull down the latest source code of fenrir.
It is now time to install fenrir. Execute the following command.
git clone https://github.com/chrys87/fenrir.git
You now need to start configuring the pi for fenrir to work.
Execute the following command.
You will be asked a series of questions. The main thing you need to change is the kind of sound output technology to use. You need to use alsa if you are using the 3.5MM headphone jack of the pi like I am doing. When you are asked about using pulseaudio type “alsa” without the quotes. Hit enter to move to the next prompt after each question. Do not forget to adjust the speed and pitch to your liking.
You now need to test your speech synthesizer configuration. Do ensure that you have your headphones or speakers ready.
sudo spd-say testing
If you hear the word “testing” you are good to start fenrir. If not, look through your logs and seek support.
To start fenrir, execute the following command.
Warning: You will need to change terminals once you execute the below command so you may want to open a new terminal and keep it handy.
Assuming you are in your home directory type the following commands.
sudo python3 ./fenrir
You should hear a stack of startup messages which signifies that fenrir is running.
I am still playing with fenrir therefore cannot comment much. The key bindings appear to be similar to those of the speek up screen reader. If you want to check them out, take a look at the config file in your installation directory or at the following link.
There is a tutorial mode available accessed with the fenrir key and h. The fenrir key is the insert key by default.
Thanks to the following people for helping me get fenrir talking and for raspberry pi advice.
Michael A. Ray
Other members on the IRC channel called #a11y at the Server: irc.netwirc.tk; specifically:
PrinceKyle, Jeremiah, chrys and southernprince.